Online Automatic Pretreament
For the best powder coating results, the surface of the workpiece you will be spraying must be clean. The clean metal itself can be powder coated immediately, but it will not give you excellent durability and corrosion protection. Good pre-treatment allows the powder coating to better bond to the metal, withstand external weathering and prevent rusting of the workpiece. Pre-treatment can bring better results to the workpiece and you should always consider adding metal pre-treatment to the coating process.
The pretreatment method is divided into liquid processing and dry processing.
Hanna offers you reasonable and economical pretreatment methods to clean your workpiece.
According to the product size, different processing forms can be selected, the structure is reasonable and the ideal use effect can be achieved.
Depending on the quality and type of metal, different cleaning and pre-treatment methods should be considered. You should also be aware of the results you want to achieve and the requirements of your customers. The most common types of metal cleaning and pretreatment are water washing, degreasing, pickling, phosphating and sand blasting.
Our product advantages:
1. Adopt automatic conveying, which can increase production efficiency by 2-4 times than manual and semi-automatic production lines.
2. With automatic pretreatment, only one technician and two general workers are needed for the whole line, which can save a lot of manpower.
3. Spraying pretreatment can effectively reduce the length of the production line body, thus reducing the use of the site.
4. The submarine pretreatment can effectively reduce the length of the production line body, thereby reducing the use of the site, and can also clean the workpiece in all directions to ensure no dead angle.
5. The top of the shed body is designed with water seal to isolate the steam more thoroughly;
6. The shed body, cylinder block and spray pipe are all made of stainless steel and full welding to ensure the normal service life of more than 15 years;
7. The contours of each process section are provided with contoured baffles and matching transition sections to prevent cross-flow;
8. The top design has a wind trough, which can discharge the acid gas and vapor accumulated at the top in time.
What are your expectations for pretreatment?
1. Adsorption of powder coatings and metals?
2. Metal corrosion resistance?
3. High quality spray effect?
Contact us for more solutions!
Contact Us
Address
Sales Office Address:
Zhongheng Building, No.26, Jianhua North Street, Chang’an District,Shijiazhuang city,Hebei province,China
Factory Address:
Shuguang road,Zhengding county,Shijiazhuang city,Hebei province,China
Call Us
Mobile:
+86 186 3213 8668(Mark Lee)
+86 186 3280 2882(Helen)
Tel: +86 311 85290395
Fax: +86 311 85290396
coating-equipment 